Navigon 10000100 - N100 LOOX Portable GPS Navigator, Руководство пользователя

Страница: 91 / 97

User Manual NAVIGON Mobile Navigator
Configuring Mobile Navigator - 89 -
Setting Meaning and possible values
Brightness Day
Select a degree of brightness (1 to 8) for
the display in "day" mode.
The factory default is 8.
Brightness Night
Select a degree of brightness (1 to 8) for
the display in "night" mode.
The factory default is 1.
Speed-Dependent
Volume
Determine whether you want the volume to
automatically increase as your speed
increases.
No: The volume is not controlled in
dependence on the speed.
Low amplification: The volume increases
slightly in accordance with an increase in
speed.
High amplification: The volume increases
considerably in accordance with an
increase in speed.
The factory default is No.
Delayed Speech
Output
If you have connected the navigation
device to the radio mute input of your car
radio, your radio may not reduce its volume
quickly enough. Delay speech output
slightly to avoid audio overlap.
The factory default is No.
Show Demo
Specify the time interval after which a
product demo appears in cases where the
navigation system is not being used.
The factory default is After 30 sec.
9.3 Current Map
The C
URRENT
M
AP
window shows which map the navigation
system is currently using.
If several navigation maps are available on the currently inserted
memory card, then you can select a different map.
1. Tap on the map's name.
A list of all the available maps opens. If the list is long, you
can move within it using the (Up) and (Down)
buttons.
2. Tap on the map you wish to use.
3. Tap on the OK button.
The C
URRENT
M
AP
window opens again. The new map is
entered.