Navigator NG2500, Руководство пользователя

Страница: 21 / 30

Page 18
Starting the Generator (Electric Start)
WARNING
WARNING
1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level and fuel.
3. Disconnect all electrical loads from the
generator. Never start or stop the generator
with electrical devices plugged in or turned on.
4. Turn the fuel valve to the “
ON
” (
l
)position.
5. Flip the engine switch to the "
RUN
"(
l
) position.
7. Move the choke lever to the “
START
” position.
8. Press and hold the engine switch in the "
START
"(
ll
)
position for few seconds and release the switch to the
"
RUN
"(
l
) position.
English
9. Do not over-choke. As soon as engine starts
and warms up, move the choke lever to the
“
RUN
” position.
10. Allow generator to run at no load for few
minutes upon each initial start-up to permit
engine and generator to stablize.