
Industrial VPN Router NR500 Series User Manual
Page 19 / 77
•
Set to a static IP address
click "
Use the following IP address
" to assign a static IP manually within the same subnet of the
router.
NOTE
:
Default gateway
and
DNS server
is not necessary if PC not routing all traffic go through
NR500 router.
3.2
Factory Default Settings
NR500 router supports Web-based configuration interface for management. If this is the first time
for you to configure the router, please refer to below default settings.
Username:
admin
Password:
admin
LAN IP Address:
192.168.5.1
(Eth1/Eth1~Eth3 bridge as LAN mode)
DHCP Server:
Enabled