Throttle
SETTING UP
Unfolding
Make sure your e-scooter is powered off before
unfolding.
1. Push the folding pedal forward.
2. Unfold the steering tube and push it until you
hear a click.
3. Unfold the kickstand to support the scooter.
4. Unfold the handlebar clamp.
5. Remove a handlebar from its holder.
6. Push the pin on the handlebar and insert the
handlebar into the steering tube joint until the
pin pops out and locks in the handlebar.
7. Repeat step 5-6 for the other handlebar.
8. Push down the handlebar clamp to secure the
handlebars.
If the handlebars are still a bit loose, unfold
the handlebar clamp, tighten the two bolts
WARNING: Do not
remove this lever.