Navig[8]r NAVBIKE-GPS, Руководство пользователя, Страница: 4 / 17

USER MANUAL
NAVBIKE-GPS
4 | P a g e
designed to save the user time and to reduce the required button presses.
2.1
From the main time screen, use the MODE button to enter the main menu settings
screen. Each press will move you past the following 7 options;
> BIKE, CHRO (Timer / Chronograph), DATA, ALRM (Alarm), SET (User settings)
and TIME
2.2 For the following example, you need to keep pressing the MODE button (from the main
time screen) until SET appears on the screen. Then wait 3 seconds to enter this sub-
menu option.
2.3 Each subsequent press of the ST/STP/+ button will take you past the following 9
sub-menu options:
> AUTO LAP, TIME, UNIT, USER, NIGHT, CONTRAST, CHIME, ALRM (Alarm) and
ODO (Odometer)
Note 1: Although AUTO LAP is the first option; it will be discussed in the later section 11.0
SETTING YOUR USER INFORMATION - THE SET SCREEN
Setting the date and time
Note: This device has 2 separate settings for time (time zones)
3.0
Use the ST/STP/+ button to then move to the TIME screen in
the sub-menu screen. Enter the screen by pressing VIEW/LAP.
T1 (Time Zone 1) will appear. The “1” will be flashing.
3.1 Press the VIEW/LAP button to enter the T1 settings
options.
Note: Each of the two time zone times, can either be set automatically via GPS or manually by
the end user.
3.2
Use the ST/STP/+ button to toggle between MANUAL and GPS (the highlighted option
will start flashing), then press the VIEW/LAP button to confirm
your choice.
3.2.0 Manual time setting: If selected the next screen to
appear will be a time screen with “SET T1” at the
bottom of the screen. The hour digit will begin flashing.
The word “HOUR” will also be shown on the screen.