Navig[8]r NAVBIKE-GPS, Руководство пользователя

Страница: 11 / 17

USER MANUAL
NAVBIKE-GPS
11 | P a g e
NOTE 3: BEFORE MOVING TO OTHER TIMER BASED SCREENS OR BEFORE TRYING TO ADJUST
USER SETTINGS RELATING TO TIMERS, ALL CURRENT TIME RECORDS NEED TO BE RESET AND
SAVED. IF THIS IS NOT DONE, YOU WILL BE LOCKED OUT OF ASSOCIATED SCREENS. AS TIMER
SCREENS ARE SHARED, SIMPLY ENTER ANY TIMER SCREEN, STOP, RESET AND SAVE THE ACTIVE
FILE TO PROCEED.
Note 4: Aside from the DATA feature, the BIKE and CHRO features although similar looking at
first glace, are fundamentally different. Essentially both functions measure time but in different
ways - put simply:
a) The BIKE feature is a singular running timer with on screen statistics.
b) The CHRO feature is a multiple lap timer without on screen statistics.
BIKE
14.0 From the main time screen, use the MODE button to toggle to BIKE. Wait 3
seconds to enter the option.
14.1 The screen will then display GPS and INDOOR. To set up the GPS section, press the
VIEW/LAP button while GPS is flashing, alternatively toggle to INDOOR using the
ST/STP/+ button and confirm your choice
Note 1: INDOOR means no GPS data will be recorded.
Note 2: Aside from the initial GPS specific setup screens, the general operation of all time
recording screens are the same under GPS as with INDOOR. The GPS signal is simply turned on
or off before entering through to the later time screens. The GPS location data is not shown but
tracked and stored for later viewing using the PC software only.
14.1.0 GPS: After pressing the VIEW/LAP button to select GPS, the SEARCH GPS
screen will appear. Once GPS signal has been located, the screen will display
GPS GO. (If indoor is selected, this step will not be shown) Press ST/STP/+ to
begin tracking. A timer will begin rolling on the screen.
14.1.1 During operation there are two lower read outs that users can modify, to view
different combinations of statistics. The SPEED however always remain at the
top.
a) Press the VIEW/LAP button to toggle the bottom section. The name of the
setting chosen will flash momentarily before the feature begins results are
shown working. These features are: DISTANCE , SPEED, CAL (Calories), CLOCK,
ODO and CHRONO
b) Press and hold the VIEW/LAP button to toggle the middle section (top
section) in the same fashion as described above.