Navico Lowrance LVR-880US Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 60

Navico Lowrance LVR-880US Скачать руководство пользователя страница 8

8

•

your latitude (40°30.5223N) and longitude (120°23.1231E) and UTC time in 12 hour format

(12:15pm).

•

the name of the destination waypoint (FISHY), its bearing (138°), your distance in nautical miles,

mile, or kilometers (depending on your choice of units), and any cross track error (XTE) are
shown.

1.3 Beep tones & call alerts

Error

3 cycles of 3 beeps

Acknowledge

1 long beep

Alarm

6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)

LL position call alert

??

WX alert / SAME alert

Ear-catching multi-tone sequence

ROUTINE call alert

Friendly two-tone ring tone (press any key to cancel)

URGENCY call alert

6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)

SAFETY call alert

??

DISTRESS call alert

6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)

1.4 How to put the radio into MENU mode

You can customize many settings on the LVR-880 to suit your own preferences and enter and store
alphanumeric data (such as a buddy name), but you cannot do this while the radio is operational, you
must put the radio into MENU mode first.
1. Hold

down CALL MENU for about 3 seconds to put the radio in MENU mode.

Note that only three menu items can be displayed at any one time on the LCD.

2. Press EXIT or PTT any time to quit MENU mode and return to operational mode.

1.5 How to Display and Navigate Menus

Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
To navigate through a menu:
1. Press + or – on the microphone OR turn the Channel Select knob on the base station to scroll up

or down through the menu until the cursor is positioned at the desired option.

2. Press ENT (the center of the Channel Select knob) to display that option.

1.6 How to Enter Alphanumeric Data

1. Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
2. For example, select BUDDY LIST then press ENT. Press ENT again for a new Buddy and enter

the alphanumeric name.

3. Press + or – on the microphone OR turn the Channel Select knob to step through alphanumeric

characters one at a time.

4. Press ENT (the center of the Channel Select knob) to confirm your choice or setting.
5. If you make an error, press – until < is displayed, then push the center of the Channel Select knob

to backup.

«
...
6
7
8
9
10
...
»

Содержание Lowrance LVR-880US





























































Отзывы:

Нет отзывов