NavePoint 42U Скачать руководство пользователя страница 9

Страница: 9 / 10

www.NavePoint.com

-Combining (Baying) Cabinets

WARNING: Combining cabinets is not a substitute for stabilizing the cabinets. Each cabinet in a bay of combined

cabinets requires the same stabilizing measures as a standalone cabinet.

Each cabinet includes 4 baying brackets (2 on the Front Frame/2 on the Back Frame). Points A correspond to baying

connection points B on the adjoining cabinet. The baying connection points already contain screws.

1: As shown in above picture, remove the Front Door/Back Door and Side Panels of cabinets.

2: Remove the screw from each baying point B.

3: Loosen the screw in each baying bracket and turn each bracket 90 degrees toward the adjoining cabinet, aligning

each bracket with the corresponding baying connection point on the adjoining cabinet. If you want to leave a 10mm

gap between two cabinets, use the outside hole(C) of the bracket. If you want two cabinets to be connected without

any gap, use the middle hole(D) of the bracket.

4: After connecting all brackets and confirming that the cabinets do not need further adjustment, tighten all screws.

Содержание 42U

Страница 2: ... com 1 Feature Identification 1 Front Door Perforated or Glass 2 Back Door 3 Removable Side Panel 4x 4 Top Panel Fan Compatible or Cable Management 5 Bottom Panel 6 Vertical Mounting rails 4x 7 Cable Management Rails 2x 8 Casters 4x 9 Levelers 4x ...

Страница 5: ... s perpendicular to the Front Frame of the cabinet 2 Disconnect the door s ground wire 3 Lift the door from the hinges and remove it from the Front Frame of the cabinet 4 Remove the door hinges from the Front Frame 5 Rotate both hinges 180 degrees and attach them on the opposite side of the Front Frame ...

Страница 6: ...otate the Front Door 180 degrees 7 Unscrew the Front Door Lock and rotate it 180 degrees Reattach the Front Door Lock into the Front Door 8 Unscrew two hinges inside of the Front Door then reattach each of them using the holes above the original position ...

Страница 7: ... keys 2 Remove Side Panels by sliding the plastic latch downward Adding or Removing Top Panel WARNING Do not attempt to use the roof panel for weight bearing purposes Do not attempt to add or remove the roof panel without assistance From inside of the enclosure Pull the 2 pins near the rear of the roof panel and push the roof panel upward ...