www.NavePoint.com
3
22U Configuration
Warning:
Do not attempt to mount to wall, when equipment is mounted inside rack. Rack can hold up to
150 pounds evenly distributed. Make sure wall surface can hold weight of rack/equipment.
Insert one end of the
Long Vertical Mounting
Rails (C) into the corner of
the Bottom Panel Frame
(A) (both panel frames
can be used as a top or a
bottom) and secure them
with 2 of the M5 x 10 mm
Hex Head Screws (G) on
each side using Hex
Wrench (J).
Note: The front of the
Bottom Mounting Panel
Frame (A) has a front
panel without wall-
mounting holes
Using one of the
Mounting Rail Tie Plates
(F) and four of the M5 x
10 mm Hex Head Screws
(G), connect one set of
the Short Vertical
Mounting Rails (B) to the
Long Vertical Mounting
Rails (C) using Hex
Wrench (J).
Repeat this step for the
other set of vertical rails.
