6
-
Squared Hole Mounting
1
Locate the numbered square openings on the Vertical Mounting Rails (B) where you plan to install your
equipment. Install 12-24 threaded Cage Nuts into the square openings to provide an attachment point for the
12-24 threaded Mounting Screws. Note: Consult your equipment documentation to determine how many
cage nuts will be required and where they will need to be installed.
a-
From the inside of the Vertical Mounting Rails (B), insert one of the flanges of the cage nut through the
square opening. Press it against the side of the square opening.
b-
Compress the cage nut at the sides slightly to allow the remaining flange to fit through the square opening.
When the cage nut is properly installed, both flanges will protrude through the square opening and will be
visible on the outer surface of the mounting rail. Repeat steps 1a and 1b until all required cage nuts are
installed.
2
After installing the required cage nuts, use the included 12-24 threaded Mounting Screws to secure your
equipment into the installed 12-24 threaded Cage Nuts.
-
Tapped Hole Mounting
Use the included 12-24 threaded Mounting Screws to
secure your equipment to the Vertical Mounting Rails
(B).
