NavCom Technology REX-Bluetooth, Руководство пользователя

Страница: 5 / 7

5
EN
8. TABLE OF SIGNALS
LED BEEP FREQUENCY DESCRIPTION
Blue No
On
constantly
The device is in standby
mode.
Blue Yes
Flashes
slowly
The device has detected
the mobile phone within
the range of approx. 2 m.
By pressing and holding
the Bluetooth sign for
<1.5 s, the doors unlock
(relay 1). By pressing and
holding the Bluetooth
sign for 2–4 s, relay 2 is
triggered.
Blue Yes
Flashes
quickly
The device is being paired
with the mobile phone. It
has 2 minutes to pair.
Yes 3 x 1 s
The phone is deleted from
the base.
Yes 5 x 1 s
Delete entire base func-
tion or restore factory
settings. The base has
been deleted. The doors
unlock.
•
Press and hold the Bluetooth sign for 40 s; after that time the
device emits 5 beeps. After all phones are deleted, relay 1 is
triggered and the doors unlock.
ATTENTION: after deleting all phones from the base it is
no longer possible to unlock the doors with the device,
until at least one phone is paired with it. You need the
PIN code to do this.
Restoring factory settings:
Factory settings of the device can be restored by pressing and
holding the button on the internal unit for 30s. After that time
all paired phones are deleted and the device emits 5 one-sec-
ond beeps. The internal unit is placed inside the doors next to
the motor mechanism. To access the internal unit, you must un-
screw the motor mechanism and pull it out of its profile.
7. MAINTENANCE AND CLEANING OF THE DEVICE
The device does not require maintenance. Should the device
need cleaning, use a dry or slightly damp soft cloth. Do not use
aggressive detergents, solvents, lye or acids for cleaning. Use
of aggressive cleaning agents may damage the surface of the
device; in this case complaints are invalid.