BHM
10/18/18
NTV-DOC328
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
8 |
P a g e
If adding an AUX video or HDMI source:
1.
Disconnect POWER/CAN Harness from interface
2.
Place DIP SWITCH 1 in the DOWN position, reconnect power
3.
Press and hold the
BACK arrow or press the NAVI
button on the dash
to activate ‘NAV input’
4.
Press
OK
button on remote 4 times, then press
POWER
SET
–
FRON CAM
: Front camera
timer option setting (5, 7, 9 seconds etc)
. This
shows after leaving reverse gear. If the user wants only an AUX video input
without front camera (or front cam without timer)
, leave these options
OFF
and use DIP SWITCH 2 instead.
AV1-SEL:
Set to
‘HD95E’
if adding the HD-LINK adapter for HDMI Input.
Once finished with settings,
place DIP SWITCH 1 back into the
UP position
and
reset power to interface.
Setting/Navigating OSD Menu
Before you start:
•
The IR-Eye must be connected
•
Make sure the car’s ignition is on and radio is on
•
You must be in
Reverse Camera
mode
OR
AUX Video
mode (see below):
•
Reverse Camera Mode
adjusts
Reverse Camera Settings
•
AUX Video Mode
adjusts AUX Video Settings
•
Press the
OK BUTTON
4 times (numbers will display per press), then press
POWER
.
•
The
OSD Menu
will appear on screen (auto-time out in about 5 seconds if no
action occurs).
Functional Parking Guidelines ON/OFF
Parking Distance Control
ON/OFF (while in reverse)
Adjust FPG Position
Adjust PDC Position
‘Safe to move?’
ON/OFF
PDC
RVC Menu
AUX
VIDEO
Menu
Return
(AUX VID
menu
control)