BHM
07/6/15
NTV-DOC209
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
6 |
P a g e
SVS-6 Operation
Reverse Camera (Video 6):
Placing the vehicle in reverse will display the connected reverse camera as usual,
unless
a Trailer camera is present, connected and powered on. In this case, the
Trailer Cam
RCA signal will
have priority over the typical RVC RCA.
AUX Video (Video 5):
Whenever
input 3
receives 12v (+), the connected AUX video image will display on
screen
with lowest priority (s
ee chart below).
Left & Right Turn Signal Cameras (Video 4 & 3):
When connected properly, normal usage of the OEM turn
signal stalk will display either left or right turn signal image, respectively.
If the user desires the
display screen to return to factory in 12 seconds
, dip switch #2 must remain UP.
If the user desires the
Turn Signal Cameras to display (priority) over the RVC image
, dip switch #3 must
remain UP.
Front Camera (Video 2):
Whenever
input 2
receives 12v (+), the connected front camera image will display on
screen
with second-to-last priority (s
ee chart below).
If the user desires the
Front Camera to display for 12 seconds only
, use a momentary button instead of
a toggle switch. For this function, dip switch #4 must remain UP.
If the user is expecting to be able to automatically switch between reverse and front cam (when in and
out of reverse gear), the front camera activation must be on a toggle switch, not a momentary button
(using built-in SVS-6 timer).
Trailer Camera (Video 1):
This is a video-sensing input. If you have a video signal (such as a trailer or 5
th
-wheel
camera) connected to this RCA input and the camera is powered, then this video signal will automatically take
priority over the usual RVC input RCA signal.
This condition will remain until the signal or power is disconnected
from this video source.
Below is a chart for Video Input priority order. Installation requirements will vary, adjust the DIP Switches
to suit your needs. See page 3 for Dip Switch options.
PRIORITY
VIDEO INPUT RCA
Condition
1
st
Trailer CAM
If used & when source is
connected & powered
2
nd
Reverse CAM
If Trailer CAM is not used, RVC = 1
st
3
rd
Turn Signal CAM L & R
If DIP SWITCH 3 is UP, TSC = 2
nd
4
th
Front CAM
-----
5
th
AUX Video IN
-----
