BHM
12/2/13
NTV-Doc 112
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
7 |
P a g e
12.
Flip the circuit board over, as it
will be sandwiched between the
drive and the lower half of the
chassis. There will be adequate
clearance. Run the LVDS cable
through the notch you made from
step 10. Keep an eye on this cable
when closing the chassis so it
won’t be pinched.
13.
After the chassis has been properly
reconnected, reattach the LCD face
beginning with the 2 ribbon cables.
Next, connect the LCD face to the
chassis starting with the
top
anchors
, then swing the face down
and clip it together. Proceed
CAREFULLY!
