BHM
01/04/19
NTV-DOC337
4 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
RGB-LEXv2 Power Connections
1.
From the provided
RGB Power Harness
, connect the
black wire
to chassis ground (-) and
the
red wire
to an ACC 12v (+) source (cigarette lighter, etc).
2.
Connect the
white/red wire
(INPUT 1)
to a 12v
(+) reverse wire. Any time this wire
receives 12v (+), the video signal provided to
VIDEO 1
will be displayed on the media
screen (while in NAV mode from the radio).
3.
Optional:
If adding a secondary AUX Video source to this vehicle, connect the video
signal RCA to the
VIDEO 2
port on the
Power Harness
. This source can be viewed at any
time when the
white/blue
(INPUT 2)
wire receives 12v (+).
RGB-LEXv2 Remote Control / Brightness Setting
•
The RGBv2 uses a (provided) remote for the following optional adjustments:
o
Arrow keys adjust (shifts) VIDEO 1 or 2 image
LEFT, RIGHT, UP &
DOWN
(
OEM pass through image is not adjustable
)
o
Zoom/Page arrows adjust brightness
o
Pressing
MENU>MAP>BACK
(in order) will
default all settings
.
•
To adjust brightness of VIDEO 1 or 2 image, use the buttons
on the RGB side of the module and adjust to suit.
NOTE:
when completing install, mount the RGBv2 module so that
the buttons are not being pressed.
