WARNING
To avoid dangerous distractions that may lead to an accident, the driver should never operate
the system while the vehicle is in motion. Before installing this product, the seller should
inform the end-user of proper use and compliance with the proper instructions and all state and
federal laws.
Vehicle Preparation
Before beginning your installation, familiarize yourself with the installation instructions and the
SoftTouch Navigation system components.
To ensure your safety,
(A)
apply the emergency brake and
(B)
read this entire manual before
beginning.
CAUTION
: It is advisable to disconnect the negative battery cable for 3 minutes before
beginning installation, to avoid unintended air bag deployment. Note and record any anti-theft
radio codes prior to disconnecting.
Default Programming Switch (Dip Switch) Settings
Default Programming Switch Settings
1 – Off
2 – Off
3 – On
4 – Off
5 – On
6 – On
7 – Off
8 – On
Factory or Aftermarket Camera Settings
To use an aftermarket camera – Place switch #1 in
OFF
position.
To use the vehicle’s factory camera – Place switch #1 in
ON
position.
NTV-DOC218
