2 |
P a g e
Ford Audio Integration Supplementary Manual (cont.)
Components for audio integration:
1. GPS Audio Box
2. Wiring (FD-AUDSPK-02)
3. Wiring (AUD-6PIN-01)
4. Main Harness (same harness used in main install)
5. Rear-LCD (connected to GPS box from main install)
Steps:
1. Connect both FD-AUDSPK-02 and AUD-6PIN-01 to GPS Audio Box
2. Connect white power plug to Main Harness
3. Insert green wire with pin to Main Harness (See figure 1)
Figure 1
Figure 1a
4. Connect 2-pin speaker plug to Rear-LCD speaker plug
5. Locate the dash center speaker
6. AUD-6PIN-01 has (4) wires labelled as SPK IN+, SPK IN-, SPK OUT+ and SPK OUT-
7. Cut the dash center speaker wire and connect radio side wires to SPK IN+ and SPK IN-
8. Connect speaker side wires to SPK OUT+ and SPK OUT-
** Normally, radio audio will by-pass audio box. When GPS talks, audio box
will mute factory audio output and provide GPS audio to the dash speaker. **
insert pin here
green wire from
FD_AUDSPK-02
If center dash top speaker is not available, connect
supplied external speaker to REAR-LCD for gps audio.
(Alternatively, use 2-1/4” speaker with gps audio box)
