BHM
11/19/19
NTV-DOC283
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
Adding HD-LINK Adapter (HDMI Input)
Follow the instructions below when adding the HDMI adapter (HD-LINK) to enable HDMI
input to the OEM screen:
1.
Put dip switch #1 in the
DOWN
position.
2.
Activate the ‘NAV INPUT’ by
holding
the
‘HOME’ or ‘MENU’
button on the dashboard.
3.
Once ‘NAV INPUT’ shows on the
screen, on the remote press the
OK BUTTON
4 times
, then press
POWER
.
4.
Navigate to the
‘NAVI’
section.
a.
Select
‘HDMI
-
SEL’
b.
Choose
‘HD95E’
c.
Press
MODE
on the remote
to return and exit the OSD menu (or let it
time out).
5.
Replace dip switch #1 to the
UP
position.
6.
Connect the
black wire
to ground (-) and the
red
wire
to ACC power (+) from the main power
connector on the
HD-LINK
adapter. The RCA’s on
this plug provide audio from the HDMI source.
