BHM
11/18/14
NTV-DOC117
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 |
P a g e
5. and 6.
PROG. OUTPUT A and B:
Two +12V DC outputs controlled by the Up and Down mirror
buttons, or automatically.
NOTE 4
: The Barracuda menu for PROG OUTPUT A and B are identical. They operate
independently of each other, but can share the same control button (Up/Down).
Accessory:
+12V is output from port A or B when the
Accessory power is on.
Engine:
+12V is output from port A or B when the
Engine is on.
Front Camera:
Pr12V DC to the Front camera,
when installed and enabled.
Ant. Interrupt:
Select Antenna Interrupt to enable VIM
in Chevrolet or GMC vehicles.
Toggle if “Up Arrow” is held for 2 seconds:
Press and
Hold “UP Arrow” for 2 seconds turns on/off +12V output from
port A or B.
Pulse if “Up Arrow” is held for 2 seconds:
Press and
Hold “Up Arrow” for 2 seconds enables a +12V pulse for
300ms.
NOTE 5
: Select “FRONT CAMERA” for the programmable output connected to the camera and
select “ANT. INTERRUPT” for the output connected to the external relay board.
7.
FORCE REAR CAMERA:
Enables/disables Forced Rear Camera mode and the Rear Camera
output on pin 11. Selecting OFF disables the forced rear
camera function.
OFF: Disables force rear camera.
ON: Enables Force Rear Camera. The Down Arrow key
will activate/deactivate the rear camera image.
NOTE:
In order to use this function with the factory camera, pin 11
of the Barracuda needs to be connected to the Rear Camera Module (see Page 8.) This is not
necessary for an aftermarket camera.
8.
FRONT CAMERA:
This option enables Front camera support. If a front camera (regular or
FLIR) is to be controlled then select Front Camera = ON or FLIR. The default setting is Front
Camera = OFF.
OFF: No front camera.
ON: Used when a front camera is being installed.
FLIR: FLIR camera present.
