BHM
12/12/16
NTV-DOC277
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
9 |
P a g e
AUDI-P60H OSD Menu Options
continued
BT-CALL:
How a (OEM setup) Bluetooth phone call is handled while in AV/HDMI mode:
o
ON -
When in AV mode, the unit will transition to the OEM screen when a
Bluetooth phone call is active, then return when call is ended.
o
OFF -
There is no screen transition when a BT call is active. The screen will
remain in whatever mode it is currently on.
V-MOVION:
N/A
FRON CAM:
Front camera timer (AV1) = without expansion board; (AV3) with expansion
board
o
5s, 7s, 9s, 11s:
Choose one (timer, in seconds), for the amount of time the
front
camera (AV1)
shows after the vehicle is transitioned out of reverse gear
o
OFF:
No timer activation
OEM FCAM:
N/A
VIDEO ADJ:
Adjust video settings for AV1/AV2, etc
AIR-CON:
Used on vehicles that display the HVAC/volume information on the screen
whenever an adjustment is made.
o
ON:
When in AV mode, the screen will transition to the OEM screen to
display the HVAC/volume adjustment, then auto transition back to AV mode.
o
OFF:
When in AV mode, the screen will remain while HVAC/volume
adjustments are made.
REAR MODE:
Used to determine operation when the vehicle is placed into reverse.
ON:
RVC dip switch (#4) dependent (follows DS #4).
OFF:
The unit will ignore the reverse gear. (No screen transition in AV or
OEM)
DIP 4 ON
: Aftermarket camera input: In AV/HDMI or OEM, the
screen will transition to the RVC input when reverse is detected.
Will display any extra overlay info, PDC, active guidelines.
DIP 4 OFF
: OEM equipped camera: In AV/HDMI the unit will
transition into the OEM screen when reverse is detected.
REVERSE WIRE:
Providing 12v (+) to the
green wire
acts as an external activation
for the selected input (connect through toggle switch, SVS-6, etc).
o
REAR MODE:
Follows the REAR MODE operation (with guideline overlay and any
additional options)
o
REAR:
Displays the RVC input video in its raw form (no extra overlays)
o
AV1:
Displays AV1 input
