BHM
12/12/16
NTV-DOC277
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
8.
Connect the video feed from the camera to the RCA among the main power harness
labeled ‘CAMERA’.
9.
Connect the white plug from the
Power/CAN Harness
to the port on the AUDI-P60
interface labeled
‘POWER CAN’
.
10.
Optional:
If adding an additional composite video input (including front camera), connect
the video signal to the RCA among the Power/CAN Harness labeled ‘CVBSIN’
.
11.
Optional:
Powering (12v) the
green wire
through a toggle switch (not included) among
the power harness can be set to show either the
‘CAMERA’ RCA
or
‘CVBSIN’
RCA at will.
See OSD Menu settings (page 8 & 9) to adjust
‘REVERSE LINE’
.
12.
Start the car and test for proper functionality before replacing any dash pieces.
