Nautronic NG12, Руководство по обслуживанию

Страница: 6 / 76

D1
MAIN
F3
1AT
250V
D2
230V
D2
D1
F3
J2
Wireless module
J3 J4
D8 D7 D6 D5 D4 D3
F2 F1
NAUCON-1000 – QUICK GUIDE | 10
HARDWARE PROBLEMS: Locate the problem with a little help from
the diodes and the illustration below,
Fig. 8
.
Trouble shooting
D1
Power connection OK.
OFF, control power connection
D2
F3 230V fuse OK.
OFF, change
*
F3 (1AT)
D3
F1 12VDC horn OK.
OFF, change
*
F1 (5AT)
D4
F2 24VDC digits OK.
OFF, Change
*
F2 (5AT)
D5
24VDC for Naucon-1000.
Remove all plugs connected to J2, J3 and
J4. If D5 light turns on, there might be
a short circuit in the cables or in Nau-
con-1000.
D6
Naucon-1000: Flashing when data is re-
ceived through cable or wireless.
Naucon 10, 20, 30, 40: Only a short flash
when button is activated.
OFF, no data received.
D7
Always flashing. Internal operation
OFF, change NGMCB or call service.
D8
Naucon 1000:
Flashing when wireless data is received.
→ Wireless module must be installed for
D8 to function.
→ Make sure Naucon-1000 is turned on.
Naucon 10, 20, 30, 40:
Only a short flash when button is activated.
*
Change of fuse. Press top of fuse holder
and turn counter-clockwise.
Fig. 8 – Normally placed at the bottom of the scoreboard
Power connection
Important notice
Before calling nautronic for service please go through the above instructions step by step
and make notes.
5AT
5AT
4