Nautronic NG12, Руководство по обслуживанию

Страница: 35 / 76

NG12 Board Zone
SW 2.15
Documentation of
How board zone works in NG12
Revision: 1
February 13, 2014 Page 2
2.1 Standard Scoreboard addresses.
Each Scoreboard type has an address.
10-19: Addresses Main Scoreboards. Default is 11 .
20-29: Addresses Sideboard Home/Left side . Default is 21 .
30-39: Addresses Sideboard Guest/Right side. Default is 31 .
40-49: Addresses Shot Clocks . Default is 41 and 42 , as Shot clocks come in sets of two.
50-59: Addresses Dressing-room . Default is 51 .
2.2 Checking the Scoreboard address.
The address of the Scoreboard can be found in the bottom, besides the Power-connector. It is written on a silver-
colored label, as shown on the picture.
The address of the scoreboard is displayed in the home score (if available), when the scoreboard is powered on. The
address of the scoreboard can also be displayed through the board diagnostics menu on the Naucon-1000.
2.3 Board zone setup
To enter the Board zones setup, do the following:
1. Exit to the Select sport menu.
2. Enter the General Setup.
3. Enter the Service menu.
4. When prompted for a password, enter
1166 .
5. Select page 3.
6. Enter Board zones setup.
Each Zone has a color.
Zone 1 is Blue .
Zone 2 is Green .
Zone 3 is Red .
Zone 4 is Yellow .
The Board zone setup is configured with the addresses of the Scoreboards. Each scoreboard address is assigned to a
zone by pressing the address number until the address number has the color of the desired zone. When pressing
accept the new board zone information is transmitted to the highlighted scoreboard addresses.
33