Nautilus T626 Скачать руководство пользователя | Manualshive

Страница: 50 / 58

background image

50

Adjusting the Belt Tension

If the walking belt starts to slip during use, it is necessary to adjust the tension. Your treadmill has tension bolts at the rear of
the treadmill.
1. Before you adjust the belt tension, start the treadmill by pushing the START button.

Be sure not to touch the walking belt or step on the power cord. Keep bystanders and children away from the product
you are servicing at all times.

2. Use a 6 mm hex key to turn the right and left belt adjustment bolts clockwise a 1/2 turn, first one bolt and then the other

bolt until the belt does not slip.

3. After you adjust each side the 1/2 turn, do a test to see if the belt stopped slipping. If the belt still slips, do steps 2 and 3

again.

If you turn one side more than the other, the belt will move away from that side of the treadmill and may need realignment.

NOTICE:

Too much tension on the belt causes unnecessary friction and wears the belt, motor and electronics.

4. Push PAUSE/STOP twice to stop the walking belt and end the Quick Start workout.

6mm

6mm

Aligning the Walking Belt

The walking belt should be centered on your treadmill at all times. Running style and a non-level surface can cause the belt to
move off center. Minor adjustments to the 2 bolts at the rear of the treadmill are necessary when the belt is off center.

The edges of the Walking Belt should be under the Side Foot Support Rails. If an edge of the Walking Belt can be
viewed, be sure to adjust the Walking Belt until the edges are not viewable and are below the Side Foot Support Rails.

1. Push the START button to start the walking belt.

Be sure not to touch the walking belt or step on the power cord. Keep bystanders and children away from the product
you are servicing at all times.

2. Stand at the rear of the treadmill to see which direction the belt moves.
3. If the belt moves to the left, turn the left belt adjustment bolt 1/4 turn clockwise and the right belt adjustment bolt 1/4 turn

counterclockwise.

If the belt moves to the right, turn the left adjustment bolt 1/4 turn counterclockwise and the right adjustment bolt 1/4
turn clockwise.

4. Monitor the path of the belt for approximately 2 minutes. Continue to adjust the bolts until the walking belt is centered.

«
...
48
49
50
51
52
...
»

Содержание T626



























































Отзывы:

Нет отзывов

Похожие инструкции для T626

A42t Sport Treadmill

Бренд: Epic Fitness Страницы: 40

Бренд: Horizon Fitness Страницы: 17

Бренд: Weslo Страницы: 28

Бренд: Healthrider Страницы: 19

Бренд: ProForm Страницы: 27

PRO-FORM 980 CS

Бренд: ICON Health & Fitness Страницы: 36

Бренд: ICON Health & Fitness Страницы: 36

NordicTrack T6.5 S

Бренд: ICON Health & Fitness Страницы: 36

Бренд: ICON Health & Fitness Страницы: 44

Бренд: ICON Health & Fitness Страницы: 44

Бренд: ICON Health & Fitness Страницы: 32

WalkFit Classic

Бренд: NordicTrack Страницы: 30

Бренд: LifeGear Страницы: 17

Бренд: NordicTrack Страницы: 36

Бренд: Ironman Fitness Страницы: 44

Бренд: Ironman Fitness Страницы: 32

Бренд: Xebex Fitness Страницы: 13

Бренд: Precor Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды