Nautilus M-7001 A, Инструкция по эксплуатации

Страница: 14 / 18

Document NO. M-7001A-EM-English
PAGE Page 14 of 18
Engineer Manual-Trouble Shooting
VERSION C
4.
Engineering Mode
4.1.Engineering mode 1: Test mode
4.1.1.Press and hold『Stop』key then press『Start』3 seconds to enter the engineering
mode while in idle mode. The display will show software version, press『Enter』
to begin the test mode.
4.1.1.1. All display will flash together, press『Enter』to next test mode.
4.1.1.2. LED scan mode：this is for production test mode, press『Enter』to next
test mode.
4.1.1.3. LED pilot lamp scan mode：this is for production test mode, press『Enter』
to next test mode.
4.1.1.4. Keys test mode：dot-matrix show【KEY】, each key has their own code when
press a key, the code show as below, press『Enter』to next test mode.
4.1.1.5. Test mode：Press Start can drive motor, press speed keys to change speed,
press incline keys to drive incline motor, press『Enter』back to 4.1.1.1. retest,
press and hold『RESET/CLEAR』then press『Quick Start』3 seconds to exit.
Key Code Key Code Key Code Key Code
Target 001 Reset/clear
011
0 021 Spd-10 031
Rolling 002 1 012 Enter 022 Inc-up 032
Valley 003 2 013 Inc-8 023 Inc-down 033
Fat burn 004 3 014 Inc-6 024 Stop 034
Ramp 005 4 015 Inc-4 025 Fan 035
strength 006 5 016 Inc-2 026 Start 036
interval 007 6 017 Cool down 027 Spd-slow 037
Random 008 7 018 Spd-4 028 Spd-fast 038
Fitness test 009 8 019 Spd-6 029
H.R.C 010 9 020 Spd-8 030