Nautilus Hydro-Force MX3-200H Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 55

Nautilus Hydro-Force MX3-200H Скачать руководство пользователя страница 3

3

Introduction

Congratulations on your purchase of the Hydro-Force Nautilus MX3-200H. The
MX3-200H is designed to give truckmount-level performance in a portable
machine that combines versatility with ease of transport. Years of experience,
engineering, and planning have gone into the design and manufacturing of the
MX3-200H. We take a great deal of pride in the MX3-200H; our goal is no less
than your complete satisfaction.

The Hydro-Force Nautilus MX3-200H is intended for commercial use only.

This manual will provide users with the knowledge required to operate the
Nautilus MX3-200H safely, to understand how to properly operate and maintain
the machine, and to ensure that the equipment operates at its maximum
performance level.

All users must read and understand this manual completely before
operating the machine.

Always maintain this manual in legible condition adjacent to the Nautilus MX3-
200H, or place in a secure location for future reference.

Any questions pertaining to the operating or servicing of this unit should be
directed to your nearest Hydro-Force distributor.

This manual is written specifically for the Nautilus MX3-200H portable extractor
units manufactured by:

Hydro-Force
4282 South 590 West
Salt Lake City, UT 84123
801-268-2673
801-268-3856 FAX

Information in this manual is subject to change without notice and does not
represent a commitment on the part of Hydro-Force or its parent or affiliated
companies.

«
1
2
3
4
5
...
»

Содержание Hydro-Force MX3-200H
























































Отзывы:

Нет отзывов