Nautilus E514c, Инструкция по сборке, Страница: 30 / 38

30
Pausing or Stopping
The Console will go into Pause Mode if the user stops pedaling and pushes STOP during a workout, or there is no RPM
signal for 5 seconds (user not pedaling). The Console display shows WORKOUT PAUSED, and after 4 seconds the current
workout data starts to scroll automatically (the same format as Results Mode). You can use the Increase/Decrease buttons to
move through the results manually.
1. Stop pedaling and push the STOP button to pause your workout.
2. To continue your workout, push START/ENTER or start pedaling.
To stop the workout, push the STOP button. The Console will go into Results / Cool Down mode.
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capacities - Last Workout, Aver-
ages, and Totals.
When the TOTALS displayed for a statistic exceeds the maximum value, the count will start again at zero.
• Total number of workouts—maximum is 9999.
• Total hours—maximum is 999:59 (999 hours, 59 minutes).
• Average speed—mph or km (per units in setup)
• Total distance—maximum is 9999.9.
• Total calories—maximum is 999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1. Push the My Nautilus
™
button at the Power-Up Mode screen. The Console display shows the User Profiles.
2. Use the Increase(  ) and Decrease(  ) buttons to select a User profile, and push START/ENTER to make your selection.
3. After you select the User profile option, you have two options: VIEW STATS and WORKOUT. Use the Increase(

) and
Decrease(

) buttons to go to the Statistics option, and push START/ENTER to make your selection.
4. The Console display shows the User Statistics menu options—LAST WORKOUT, AVERAGES, TOTALS and RESET
STATS. Use the Increase/Decrease buttons to move between the menu options, and push START/ENTER to make your
selection.
5. Use the Increase/Decrease buttons to move between the values, or after a few seconds the workout statistics start to
scroll automatically. You can use the Increase/Decrease buttons to move through the results manually. Push STOP to exit
to the User Statistics menu.
The RESET STATS option will clear the accumulated workout values. Use the Increase/Decrease buttons to change your
selection between YES and NO, and push START/ENTER. Push STOP to exit the RESET STATS option.
6. Push STOP to go back to the User profile menu—View Stats or Workout option.