Page 7
4.
Slide the center platform into position
up against the top platform assembly
- ensure that the tension rod properly
engages with the barrel nut on the
underside of the platform.
Fig. 8
5.
Use an 11/16” open-ended wrench to
turn the trim tension rod to secure the top
and center platforms together.
11/16"
Fig. 9
6.
Use a 3/4” open-ended wrench and 5/16”
allen key to secure the rear platform brace
to the rack using two (2) pieces each of
the ½” x 1½’’ button head cap screw and
½” nylock nut, and four (4) pieces of the
½” flat washer.
3/4"
5/16"
Fig. 10