Page 17
MAINTAIN ALL EQUIPMENT:
Preventative maintenance is the key to smooth operating equipment as well
as keeping the product in safe operating condition. Failure to conduct preventative maintenance by the owner
may cause the product to operate in an unsafe manner. Equipment needs to be inspected and maintained at
regular intervals per the preventative maintenance schedule provided in this manual.
The safety and integrity of this machine can only be maintained when the equipment is regularly examined for
damage and wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that regular
maintenance is performed. Worn or damaged parts must be replaced immediately or the equipment removed
from service until the repair is made.
Daily
Weekly
Monthly
Bi-Annually
Inspect
Fasteners
X
Labels
X
Frame
X
General Maintenance
Rotate Dampening Pads
X
Cleaning
Frame
X
Inspection
Visual inspection of your units will insure a safe environment for your clients and alert you to any issues that
may require maintenance prior to equipment failure. Proper, timely visual inspection is a critical component to
the long term care of your product.
• Fasteners, hardware and attachments should be checked monthly for looseness. Tighten as required
using appropriate tools.
• Handgrips should be checked for wear or damage monthly and replaced as needed.
• Main frame should be inspected every six months for signs of unusual wear, corrosion or structural
integrity issues.
DAMPENING PADS
When pads are rotated, they should be turned 90 degrees to ensure even wear on all of the pad surfaces
IMPORTANT NOTE:
Failure to rotate platform pads every six months will void warranty. Use of steel weight
plates will void warranty.
MAINTENANCE