Nautilus Commercial Series TreadClimber TC916, Инструкция по сборке

Страница: 27 / 44

Nautilus® TreadClimber® Model TC916 Assembly Manual
asseMbly InsTRUcTIons
step3:verifyingboxcontents
Locate the following for this step:
• box 1 - Parts master Carton
• box 2 - Top Plate Carton
• box 3 - short side Panel Carton
Tools:
• scissors or utility knife
3-1 verify the contents of box 1: “ParTs masTer
CarTon”.
The carton should contain the following:
• box #1a - Left and right top upright Covers.
marked “Long side Panels” on the box.
• box #1b - Console. marked “Control Panel”
on the box.
• rear step weldment (see figure 1).
• hardware bag containing: Tv Cable (if
applicable), owners manual, magnet,
Cord Clamp, grounding harness, 5/16 allen
Wrench, service bulletin, and hardware
for attaching the Weldment, Console, and
Covers.
3-2 verify the contents of box 2: “ToP PLaTe
CarTon”.
• rear step, insert molded (see figure 2).
• Lower front Cover (see figure 3).
3-3 verify the contents of box 3: “shorT side
PaneL CarTon”.
• Left and right Pivot Covers (see figure 4).
box 1
box 2
box 3
figure 1
figure 2
figure 3
figure 4