Nautilus Be Strong TreadClimber TC916, Инструкция по сборке

Страница: 29 / 44

9
Nautilus® TreadClimber® Model TC916 Assembly Manual
asseMbly InsTRUcTIons
assemblyGuide
The following instructions provide direction in assembling the boxed units for the nautilus
®
Commercial series
TreadClimber
®
model TC916. all instructions in the manual are given with the orientation of standing on the
TreadClimber
®
facing the console. The console is the front, while the rear roller is the back.
step1:connectingWiringharness
Locate the following for this step:
Parts:
• base assembly (P/n - 17500)
• handrail upright support assembly (P/n - 17794)
1-1 Locate the three ground Wire straps on either
side of the base assembly, making sure that the
wire is extended towards the front of the unit
and doesn’t become hidden behind the handrail
upright support during step 1-2.
1-2 With the help of another person, connect wiring
harness (P/n - 17826) from the TreadClimber
®
TC916 base assembly to the wiring harness
(P/n - 17824) in the handrail upright support
assembly. see figure 1.
figure 1: Connecting Wiring harness
base assembly
handrail upright support assembly
Wiring harness
Connection
ground Wire strap
Locations