8
Step 4 Slide the Locking Collar onto the Upper Mast
Parts Needed:
• Locking Collar
• Upper mast
4-1 Slide the Locking Collar onto the Upper mast
(Figure A) with the clamp on the same side
as the warning sticker( Figure B) that is
applied to the Upper mast.
Assembly Procedure
Locking Collar
Warning Sticker
Clamp
Upper Mast
Step 3 Slide Base Shroud onto the Lower Mast
Parts Needed:
• Base Shroud
3-1 Slide the Base Shroud onto the Lower mast but do
not secure it to the Base at this time.
Lower Mast
This label should not be
visible when the stand is
setup.
If label is visible,
stand height is set too
high and could tip over
.
Figure A
Figure B
