14
Installation Procedure
Step 10 Install Upper and lower Shroud
Tools Needed:
• Phillips Head Screwdriver
Parts Needed:
• Upper & Lower Shroud
10-1 Use two Phillips Head Screws, Washers and Lock Washers
from the hardware kit to attach the Lower Shroud to the mast
just below the LCD monitor. Allow the remote Wire to exit the
bottom of the Shroud. (Figure A)
10-2 Use two Phillips Head Screws, Washers and Lock Washers
from the hardware kit to attach the Upper Shroud to the
mast as shown. (Figure B)
Step 11 Install Upper and lower Shroud
Tools Needed:
• Phillips Head Screwdriver
11-1 re-attach the Back Cover of the LCD monitor.
Figure
Figure
Lower Shroud
Upper Shroud
Back Cover
