6
D.
You can find detailed information about the controller’s settings and all of its functions in the control-
ler’s user manual. We do not recommend changing the manufacturer’s setting yourself (except for
any programs) as this can cause the factory settings to be lost and may result in you needing to fully
reset and/or re-calibrate the controller in future, which is NOT COVERED BY THE WARRANTY.
E.
Kiln model RWF-1240P (with Wi-Fi programmable controller)
only has a digital temperature-
reader (e.g. REX-C100) that is only used for reading the temperature and does not require any pre-
setting. This controller is installed on your kiln only to enable you to read the current temperature
when you are in front of your kiln.
SAFETY INSTRUCTIONS AND USEFUL TIPS FOR BEGINNERS:
Please make sure that any item(s) you place inside the chamber are not touching
the heat-
ing element(s) EVEN WHEN THE DOOR IS CLOSED.
It is always best to conduct some tests on a small quantity of your firing material before you
fire your item(s).
Using this kiln at temperatures higher than 1,240
°
C (for both models) or on temperatures
higher then 1,200
°
C for longer then 15 minutes may cause a problem with the heating ele-
ment(s) and/or with the kiln’s metal body that is NOT covered by the warranty.
This kiln must be placed on a level surface that will not be damaged by heat. A masonry or
concrete floor is recommended, but other protective materials like metal or ceramic (tiles)
sheets may be used. For a small additional charge, this kiln can also be supplied with a set
of shelves and with a metal stand to be placed on a heat-sensitive worktop.
Always make sure that the door is closed and is pressing on the pressing arm correctly,
connecting the heating elements to the power and allowing high temperatures to be reached
inside the chamber.
Always use heat-resistant gloves and long metal tweezers to remove or place item(s) from/
into the kiln.
This kiln should be kept away from all inflammable materials and other nearby heating de-
vices.
When the door is open at temperatures higher than 200
°
C (392
°
F), always maintain as
much distance as possible between your hands/face and the hot chamber. Please also wear
dark glasses to avoid any problems with your eyes.
Because of the high temperatures that this kiln can reach, you should never leave it unat-
tended when it is in use.
Never touch the kiln’s metal body and shutter on the door without gloves on as these can
burn your hands.
KEEP OUT OF REACH OF CHILDREN.
WARNING:
This is an electrical, often extremely hot piece of equipment: always follow any
applicable health and safety rules and regulations for electrical equipment and hot work in
your country.
MADE IN THE UK
WWW.TECHNICALSUPERMARKET.COM / WWW.KILNSANDACCESSORIES.COM
