NAUTICAST 1st3001001, Руководство по эксплуатации продукта

Страница: 11 / 26

page 11 of 26 1st3001001 EN 1_14.docx
1
st
-Relief GmbH Bank: UniCredit Bank Austria AG FN: 206478w, HG Wien
Handelskai 388 / Top 632 Swift/BIC: BKAUATWW VAT No.: ATU 51115305
1020 Vienna, Austria, Europe IBAN: AT24 1100 0085 7396 5400 Tax No. 014/3645
www.1st-Relief.com EORI: ATEOS1000001609
Enter the vessels information in the appropriate box:

MMSI number - enter the vessel's Maritime Mobile Service Identity number

Call Sign - enter the vessel's radio call sign (7 characters maximum)

Ship's name - enter the name of the vessel (20 characters maximum)

Select the most appropriate vessel type from the drop down menu.

Enter the vessels dimensions as follows rounded to the nearest meter
o
Dimension A - distance from bow to GPS antenna location to the
nearest meter
o
Dimension B - distance from the GPS antenna location to the stern to
the nearest meter
o
Dimension C - distance from the port side to the GPS antenna location
to the nearest meter
o
Dimension D - distance from the GPS antenna to the starboard side to
the nearest meter
 CAUTION:
If no MMSI is entered (MMSI is set to 000000000) then the AIS transponder will operate
in receive only mode and the red LED will remain on. The vessels own position will not
be transmitted. An MMSI must be entered to allow the AIS transponder to transmit its
own position to other vessels.
When you have entered all of the vessel's data click the 'Save to AIS' button to
program this configuration into the AIS transponder:
A warning will be displayed asking you to verify the MMSI number. The MMSI can only
be changed by your dealer once programmed into the transponder. You can change
all data (except the MMSI) at any time, should the need arise. Please check that the
number displayed is correct before proceeding. If the number is incorrect click the
'No' button to cancel programming of the MMSI.
Click the 'Yes' button if the MMSI is correct.
The ‘Identification’ tab will be updated to show the newly programmed vessel
information. The MMSI number will be displayed with a grey background to indicate
that it has been programmed and cannot be changed.
Connection status is indicated at the bottom left of the application window in green:
For additional Software applications unrelated to the installation, please refer to the
Link2AIS manual for technical support.