10
PREPARATION FOR USE
Installing the Camera - housing tray attachment
* drawings as illustrations only
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray then slide the
hotshoe plug of
fl
ash trigger PCB
into the hotshoe of the camera
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
make sure the camera buttons are
engaged with the camera tray
hotshoe plug
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
*
please refer to page 10 for lens
installment before sliding in the
camera
make sure the hotshoe plug cable
is not obstructed then slide the
camera tray back into the housing
along the tray rail
