Nauticam NA-D300s, Инструкция по эксплуатации

Страница: 22 / 30

21
Optional strobe attachment balls can be attached to the strobe mounting bases on the
housing or onto the top of the handles.
There are two ways of connecting strobes to the NA-D700 housing: A) by optical
connection through the Optical Bulkheads; B) by electrical connection through the
Nikonos 5-pins bulkhead.
A) Using the Optical Bulkheads
The built-in pop-up flash of the D-700 camera can be used as a
commander to send out signals (including i-TTL commands) to the strobes
via the 2 Optical Bulkheads. It can be utilised in different ways depending
on the type of strobes connected to the housing:
A1) Nikon i-TTL compatible strobes such as SB-R200, SB-600, SB-800,
SB-900:
These strobes can fully utilise the Nikon i-TTL controls protocols enabling
individual TTL exposure compensation of each of the 2 strobes connected
to the Optical Bulkheads. Do ensure that the other ends of the optical
fibres are pointing onto the light sensor window of the strobes.
To set the D-700 camera to i-TTL Commander
mode, under Menu, scroll to Custom Setting Menu
(Pencil shaped icon on the left of the LCD screen),
enter ‘e’
Bracketing/flash .
Then scroll to ‘e3’ Flash cntrl for built-in flash and
enter.