14
1.
Always open and close the housing with the front facing down, place the housing
on a flat surface or in your lap.
2.
When closing, make sure there is nothing caught between the closing surfaces of
the two halves of the housing.
3.
The housing can be opened and closed by operating the three locking latches;
when opening, first operate the latch on the top of the housing then the two on
both sides simultaneously. When closing the housing, operate the two side latches
first, then the one on the top.
4.
After closing, check that the locking latches are properly engaged and the gap
between the two halves of the housing caused by the main O-ring is evenly spaced
for the whole perimeter of the housing.
Содержание NA-D300s
Страница 1: ...0...
