INSTALL PORT TO HOUSING
1. Make sure the control knob is at its
most
outwards
position
before
mounting/ un-mounting the port. The
knob should be left at this position until
making sure that the lens and zoom
gear is properly installed.
2. When properly installed, the lens should
be perfectly concentric with the port. If
there is a slight misalignment, check
the position of the camera.
3. Engage the gear by pushing in the knob,
then turn the knob for about 45° both
ways to check if the camera switch
between normal mode and Macro mode.
Correctly aligned
Unlock, reverse the above procedures.
