14
PREPARATION FOR USE
Setting up integrated LED
fl
ash trigger
* drawings as illustrations only
1
2
insert the CR2032 batteries into the battery holders
the small LED located next to the batteries indicate the battery level, please
change the batteries once they turn RED
connect the hotshoe plug to the camera hotshoe
test the
fl
ash trigger by pressing the shutter release button on the camera
the LEDs under optical bulkheads should
fl
ash instantaneously
* positive terminal should be facing up
This housing uses an integrated LED
fl
ash triggering system. This optical
fl
ash trigger can
fi
re at the full fps of the
camera, making it the ideal solution for the rapid
fi
re fast action shooting. The LED trigger circuitboard is mounted
directly to the front of the housing, and connected to the camera with a hotshoe cable.
small LED
