NAUTICA VX3J Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 44

NAUTICA VX3J Скачать руководство пользователя страница 16

30

31

After finishing the big sec. stopwatch hand adjustment, press crown
back to position “A” to terminate the adjustment.

TO ADJUST THE 1/10 SECOND COUNT HAND (fOR 5040B)

After  activating  the  corrective  mode,  if  the  1/10  second  counter  hand
is  not  located  at  '12'  or  '0'  position,  press  pusher  “B”  once  to  activate
the corrective mode of the 1/10 second counter hand. Press pusher “A”
continuously  or  repeatedly  until  the  hand  moves  by  each  interval  and
returns to “12” and “0” position.
Press crown back to position “A” to terminate the adjustment.

TO ADJUST THE HOUR CHRONO HAND (for 5030D)

After  activating  the  corrective  mode,  if  the  hour  chrono  hand  is
not  located  at  '12'  or  '0'  position,  press  pusher  “B”  once  to  activate
the  corrective  mode  of  the  hour  chrono  hand.  Press  pusher  “A”
continuously  or  repeatedly  until  the  hand  moves  by  each  interval  and
returns to “12” and “0” position.
Press crown back to position “A” to terminate the adjustment.

TO ADJUST THE MINUTE CHRONO HAND

After activating the corrective mode, if the minute chrono is not located
at '12' or '0' position, press pusher “B” twice to activate the corrective
mode of the minute chrono hand.

Press pusher “A” continuously or repeatedly until the hand moves by
each interval and returns to “12” and “0” position.
Press crown back to position “A” to terminate the adjustment.

Once finished adjusting all stopwatch chrono hands, press crown back
to “A” position to terminate adjustment.

«
...
14
15
16
17
18
...
»

Содержание VX3J













































Отзывы:

Нет отзывов