Page 7
Insight Mount Bracket and Wiring Description
Insight can be flush mounted by removing the front cover, and using the 4 underlying mount holes as
shown below.
The front cover is held in place by machine screws that screw in from the top and bottom of the
assembly. The 4 mounting holes behind the front cover used to flush mount are also used to attach the
mounting bracket legs as shown below:
If using the mounting bracket,
attach the two side mounts to Insight prior to attaching to the mating
bracket assembly
. 4 4-40 x ¾ machine screws hold the side brackets to Insight.
DO NOT OVERTIGHTEN.
If using the bracket and mounting in a vertical configuration, the bracket mates together every 18
degrees, including 90 degrees, and use 2 M4 machine screws to fasten the side mounts to the main
mount. At least 2 #4 screws are recommended for attaching the base of the main mount to the yacht
mounting location. The base of the main mount can be rotated and locked in place.
When flush mounting, 4 #4 x 1 inch screws can be used to attach the Insight to the panel.
DO NOT
OVERTIGHTEN.
