Nautel XR12, Руководство по эксплуатации и обслуживанию

Страница: 45 / 81

XR12 Operations and Maintenance Manual Operating the transmitter
Page 2-20 Issue 3.1 2013-03-14
Adjusting screen contrast
The XR12’s LCD screen (used to display the GUI) is set by default to a contrast suitable for most
locations. The XR12 also adjusts the contrast setting automatically to compensate for changes in
temperature. However, depending on your preferences and light conditions, you may wish to increase
or decrease the contrast manually using the
LCD Contrast Setting page . To view the
LCD Contrast
Setting
page, select
Settings
from the Main Menu , then
LCD Contrast Setting
from the General
Settings menu .
Figure 2.14: LCD Contrast Setting page
To change the contrast, press the
Edit
button and then use the
Up
and
Down
buttons to increase or
decrease the setting.
Changing hardware settings
You can set thresholds, calibrate digital and analog meters, and restore factory settings using the
Hardware Settings menu . To view the
Hardware Settings
menu, select
Settings
from the Main
Menu , then
Hardware Settings
from the General Settings menu . The Hardware Settings Warning
page appears. Press
Continue
to proceed to the Hardware Settings menu - see page 2-21 .
Figure 2.15: Hardware Settings Warning page
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Contrast Level (0-255): 213
Press EDIT to modify the value.
Edit Back
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Contrast Level (0-255): 213
Press EDIT to modify the value.
Edit Back
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Continue Back
WARNING! – FACTORY SETTINGS
Modifying these settings can affect
System Operation.
Press CONTINUE to proceed.
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Continue Back
WARNING! – FACTORY SETTINGS
Modifying these settings can affect
System Operation.
Press CONTINUE to proceed.