Nautel XR12, Руководство по эксплуатации и обслуживанию

Страница: 46 / 81

XR12 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-03-14 Page 2-21
Figure 2.16: Hardware Settings menu
Use the
Up
and
Down
buttons to move the cursor to the desired option, then press the
Select
button. See:
• Setting thresholds - see page 2-22
• Calibrating meters - see page 2-24
• Calibrating analog meter - see page 2-24
• Setting high power lockout limit - see page 2-25
• Configuring NxLink (optional) - see page 2-29
Press the
Back
button to return to the General Settings menu .
If you select
Factory Settings
, a warning screen appears.
Press the
Continue
button to move to the Factory Settings menu - see page 2-27 .
10:18 0.00kW M-1 PM:AB Man Ex:A Man
HARDWARE SETTINGS
Calibration Settings
High Power Lockout
Factory Settings
NxLink Configuration
Select Back
10:18 0.00kW M-1 PM:AB Man Ex:A Man
HARDWARE SETTINGS
Calibration Settings
High Power Lockout
Factory Settings
NxLink Configuration
Select Back
Displayed only if the
NxLink is installed and
communicating with the
transmitter’s controller.