Nautel XL12, Технические инструкции

Страница: 141 / 238

12 000 WATT AM BROADCAST TRANSMITTER
XL12
Page 8-1
01 January 2002
SECTION 8
PARTS LIST
INTRODUCTION
8.1
This section contains reference designation
indexes that provide descriptive and provisioning
information for all electrical and mechanical parts
that have been assigned a reference designation and
form a part of the subject equipment.
FAMILY TREE
8.2
Figure 8-1 depicts the family tree for the
subject equipment. It is based on the descending
order of the reference designation hierarchy and
identifies all assemblies that have been assigned a
Nautel configuration control number.
MANUFACTURER'S INDEX
8.3
Table 8-1 provides a cross reference from
the original equipment manufacturers (OEM) codes
to the manufacturer's name and address. The listing
is sorted alpha/numerically by the manufacturers'
codes.
HOW TO LOCATE INFORMATION FOR A
SPECIFIC PART
8.4
To locate the information for a specific part,
the user must know the reference designation
assigned to the part. In addition, the user must know
the Nautel configuration control number assigned to
the assembly that contains the part or the full
reference designation, which includes the reference
designation of all higher assemblies.
8.4.1 WHEN NAUTEL CONFIGURATION
CONTROL NUMBER IS KNOWN:
Locate the
information for a part when the Nautel configuration
control number is known, as follows:
Refer to the table of contents (list of tables), for this
manual and identify which table is the reference
designation index for that assembly.
Locate the part's reference designation in the
identified table.
8.4.2 WHEN REFERENCE DESIGNATION
IS KNOWN:
Locate the information for a part
when the full reference designation is known, as
follows:
Enter the family tree depicted in figure 8-1 with the
full reference designation.
Follow the family tree branches to the block that
represents the lowest level assembly assigned a
Nautel configuration control number. Delete the
reference designation and then go to the table
specified in the block with the balance of the
reference designation.
Locate the part's reference designation in the
specified table.
REFERENCE DESIGNATION INDEXES
8.5
Individual reference designation indexes are
provided for all assemblies that have been assigned a
Nautel configuration control number. To obtain the
full reference designation for a specific part, the
tabulated designation must be prefixed with the
reference designation of the assembly that contains
the part and the reference designation of all higher
level assemblies. Notes at the end of each table
identify possible higher level assemblies. The
reference designation indexes are divided into
columns to aid in locating specific information.
COLUMN CONTENT EXPLANATION
8.6
The following paragraphs provide an
explanation of the purpose and contents of each
column in the reference designation indexes.
8.6.1 USE CODE COLUMN:
This column
contains a symbol/letter code which is part of a
configuration control management system. When
there is more than one variation of an assembly, each
variation will be assigned a code in this column and
the parts that are unique to a variation will be
assigned the same code. Parts that are common to
all variations will not have an entry in this column.
Notes at the end of each table explain the code's
significance.