Nautel NV7.5, Руководство по эксплуатации и обслуживанию

Страница: 121 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Issue 3.4 2016-08-03 Page 2-89
Setting user permission level
There are four levels of permission that can be assigned to users, each with their own specific
function. All users have permission to change their own username and password, but are
otherwise limited to the following functions:
•
View Only
: Can monitor equipment data only. No administrative or control functions.
•
Full Control
: Can monitor and control equipment, with no administrative functions.
•
Administrator
: Can perform all functions.
Administrator
is the only permission level
that allows addition, removal or modification of users.
•
Custom:
Administrator can customize the user permissions by manually selecting the
permission levels.
Editing account information
Adding an account
You must be an
Administrator
to use this function.
Procedure to add a user (see Figure 2.62 on page 2-91 ):
1. Open the
User Accounts
page.
2. Press
Add
(bottom of the screen) to open a small
Add User
window.
3. Beside
Username
, enter a name that identifies the new user, and press
OK
.
4. Select the new user to edit the settings.
5. Beside
User Type
, press the arrow to reveal a drop-down menu and select a type of user.
If you select
Custom
as the type of user, then go to the
Permissions
section of the
screen and mark individual permissions (see Changing permissions on page 2-90 ).
6. Press
Apply
to confirm your entries and create a new user or press
Cancel
to ignore
your entries and exit the small window without creating a new user.
Editing an existing account
To edit an existing user account, press on the desired user in the
Users
list on the left-side of the
AUI. The
Settings
for that user will be displayed on the right-hand side of the AUI. You can
edit the
Password, User Type
(see Setting user permission level above),
Auto Login
status and
Permissions.