Nautel NV7.5, Руководство по эксплуатации и обслуживанию

Страница: 122 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Page 2-90 Issue 3.4 2016-08-03
Changing the password
To change your password, press the
Change Password
button. A menu appears that prompts
you to enter the old password, new password and confirmation of the new password. Press
Apply
to save or
Cancel
to exit this menu (see Figure 2.62 on page 2-91 ).
Setting auto login (local only) status
When checked ( 
)
the selected user account will be automatically logged in to the transmitter
with all the rights and priveleges that have been assigned to that user. There may only be one
autologin user at any given time; when the
Auto Login
check box is selected for one user
account, it is automatically cleared on all other users. When not checked, the transmitter will
not login automatically and will instead prompt for username and password when it boots up.
It should be noted that only accounts with
Administrator
level permissions can set or remove
Auto Login
status.
Changing permissions
You must be an
Administrator
to edit this function.
All users have permission to change their own username and password. You can customize the
permissions assigned to a user or simply pick a predetermined set of permissions based on the
user type.
Procedure to change user permissions (see Figure 2.62 on page 2-91 ):
1. Open the
User Accounts
page.
2. Select a user from the
Users
list to display the permissions for that user in the center of
the
Permissions
window. The permissions associated with the selected user are
identified with a checkmark (  ).
3. Press on
User Type
to reveal a drop-down menu and select a new type of user.
4. If the user type in step 3 is
Custom
, set individual permissions. Under
Permissions
,
place a checkmark (

) beside each permission that you want to associate with the user.
The boxes work like a toggle - select the checkbox to place a checkmark and select
again to remove the checkmark. Choose one or more of the following options:
•
Activate/Modify Preset
- Allows the user to modify presets and change the active
preset.
•
Power Control -
Allows the user to change the power set point of the transmitter..
•
Delete Logs -
Allows the user to remove log entries.