Nautel NV7.5, Руководство по эксплуатации и обслуживанию

Страница: 169 / 183

NV10/NV7.5 Operations and Maintenance Manual Non-standard maintenance
Issue 3.4 2016-08-03 Page 4-5
Improving transmitter performance for IBOC presets
After a power or frequency change to an operating FM+HD or HD preset, optimize the
transmitter’s performance as follows:
Parts and tools
– Transmitter’s AUI
Preliminary checks
1. Verify the transmitter is operating without fault at the licensed RF output power in
FM+HD or HD mode, with standard modulating audio present.
2. Observe (maximize the display size) and save the AUI’s existing Spectrum intrument
panel (set to display transmitter output) and record the meter readings for Controller -
DC-RF Efficiency and Controller - PA Volts (see “Identifying meter information on a
specific sub-device” on page 2-48 ). Save the Spectrum display by remotely connecting
to the AUI and using your keyboard’s Print Screen button to copy the image, then
paste the image into a compatible application (Paint, Word, etc.). The spectrum plot
should indicate at least 3 dB of margin between the IBOC intermodulation products
and the blue mask limit lines (see Figure 4.1 on page 4-5 ). Maximize the spectrum
display size and measure points on the spectrum plot using the cursor (see “Spectrum
Analyser” on page 2-32 for details).
Improving performance
1. From the transmitter’s AUI, select
Local
control and then go to the
Menu
-
Presets
page. The active preset is displayed.
2. Click in the HD PA Volts field in the Mode section (see Figure 4.1 on page 4-5 ) and
reduce the voltage value by 1 V (e.g., change 48.0 to 47.0). Press
Activate
.
3. Observe the Spectrum intrument panel again. Repeat Step 2 , as necessary, until the
Spectrum’s intermodulation products are within 3 dB of the blue mask limit line or at
-77 dBc.
4. Verify that the Controller - DC-RF Efficiency meter reading has increased from the
value recorded in Step 2 of “Preliminary checks” .
5. Repeat this procedure for all FM+HD or HD presets and if the licensed power level
changes.