RADIOBEACON TRANSMITTER
ND500II (125 WATTS) DOUBLE SIDEBAND - NO VOICE
Page 7-1
01 November 2003
SECTION 7
PARTS LIST
INTRODUCTION
7.1
This section contains reference designation
indexes that provide descriptive and provisioning
information for all electrical and mechanical parts
that have been assigned a reference designation and
form a part of the subject transmitter.
FAMILY TREE
7.2
Figure 7-1 depicts the family tree for the
subject transmitter. The family tree is based on the
descending order of the reference designation
hierarchy and identifies all assemblies that have been
assigned a Nautel configuration control number
MANUFACTURER'S INDEX
7.3
Table 7-1 provides a cross-reference from
the original equipment manufacturers (OEM) codes
to the manufacturer's name and address. The listing
is sorted alpha/numerically by the manufacturers'
codes.
HOW TO LOCATE INFORMATION FOR A
SPECIFIC PART
7.4
To locate the information for a specific
part, the user must know the reference designation
assigned to the part. In addition, the user must know
either the Nautel configuration control number
assigned to the assembly that contains the part or the
full reference designation, which includes the
reference designation of all higher assemblies.
7.4.1
WHEN NAUTEL CONFIGURATION
CONTROL NUMBER IS KNOWN
: Locate the
information for a part when the Nautel configuration
control number is known, as follows:
-
Refer to the table of contents (list of tables) for
this manual and identify which table is the
reference designation index for that assembly.
-
Locate the part's reference designation in the
identified table.
7.4.2
WHEN FULL REFERENCE
DESIGNATION IS KNOWN
: Locate the
information for a part when the full reference
designation is known, as follows:
-
Enter the family tree depicted in figure 7-1 with
the full reference designation.
-
Follow the family tree branches to the block
that represents the lowest level assembly
assigned a Nautel configuration control
number, ensuring the prefix for each block is
deleted from the reference designation, and then
go to the table specified in the block with the
balance of the reference designation.
-
Locate the part's reference designation in the
specified table.
REFERENCE DESIGNATION INDEXES
7.5
Individual reference designation indexes
are provided for all assemblies that have been
assigned a Nautel configuration control number. To
obtain the full reference designation for a specific
part, the tabulated designation must be prefixed with
the reference designation of the assembly that
contains the part and the reference designation of all
higher level assemblies. Notes at the end of each
table identify possible higher level assemblies. The
reference designation indexes are divided into six
columns as an aid to locating specific information.
Refer to paragraph 7.6 for an explanation of column
contents.
COLUMN CONTENT EXPLANATION
7.6
The following paragraphs provide an
explanation of the purpose and contents of each
column in the reference designation indexes.
