manualshive.com logo in svg

Nautel NARF79, Руководство по установке

Поделиться
Скачать
Nautel NARF79 Скачать руководство пользователя страница 66

VX150 TO VX2 INSTALLATION MANUAL

COMMISSIONING

PAGE 1.11.2

VERSION 0.3  2021-01-14

Pre-Commissioning Tasks

1.

Terminate the transmitter's RF output into a precision, 50 

, resistive dummy load that is 

adequately rated for the maximum expected total power output.

2.

Verify all program inputs are connected to the back of transmitter.

3.

Ensure the external interlock is closed. Nautel ships the VX transmitter with an external interlock 
mating connector that has a short circuit between the two contacts.

NOTE

: A mating connector (Nautel part # JR52) is supplied in the Spares kit to facilitate this connection. 

It is intended to plug directly into the 

INTLK 

connector on the rear panel of the transmitter. 

WARNING! If a jumper is placed between the INTLK inputs on the rear 
panel of the transmitter, safety features controlled by the external 
interlocks will be disabled. A fail-safe method of alerting personnel to this 
fact should be implemented. Voltages which are dangerous to life will be 
present on the RF output stages and the antenna system if the transmitter 
is turned on.

Содержание NARF79























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды